In this guide

  1. The short answer
  2. The hydrophobic effect: why nonpolar groups avoid water
  3. Which residues are hydrophobic
  4. Hydrophobicity scales: how a number gets assigned
  5. From residues to a whole peptide: GRAVY and the hydrophobic moment
  6. Measuring hydrophobicity: partitioning and reversed-phase HPLC
  7. Solubility and aggregation
  8. Separation, retention and the limits of prediction
  9. Membranes, amphipathicity and the hydrophobic moment plot
  10. Hydrophobicity versus charge: two different axes
  11. What this guide does not establish
  12. Frequently asked questions
  13. References
Start here

The short answer

Peptide hydrophobicity is the tendency of a peptide, and of each amino-acid side chain in it, to avoid water and prefer nonpolar surroundings. It is driven by the hydrophobic effect, quantified by hydrophobicity scales that assign a number to every residue, and measured in practice by how strongly a peptide is retained on a reversed-phase HPLC column.

The word covers two levels at once. At the level of a single residue, hydrophobicity is a property of the side chain: an isoleucine or a phenylalanine, with its oily hydrocarbon or aromatic ring, is strongly hydrophobic, while an arginine or an aspartate, carrying a charge, is strongly hydrophilic. At the level of a whole peptide, hydrophobicity is the sum of those residue preferences, often condensed into a single score such as GRAVY, or, where the arrangement matters, into a directional measure such as the hydrophobic moment.

None of this is about a specific compound or a specific vial. Hydrophobicity is a general property of the sequence, set by which amino acids are present and how they are arranged, and the rest of this guide takes it apart: the thermodynamics behind it, the scales and metrics that measure it, and the three places it shows up most — solubility, chromatography and membrane interaction. For the related property of net charge, see What Is the Isoelectric Point?; for the chromatography it governs, see What Is HPLC?

Chemistry

The hydrophobic effect: why nonpolar groups avoid water

Hydrophobicity is not really an attraction between nonpolar groups; it is water's reluctance to surround them. A hydrocarbon side chain cannot form hydrogen bonds with water, so the water molecules next to it cannot hydrogen-bond outward the way they do in bulk liquid. Instead they arrange themselves into a more ordered cage-like shell around the nonpolar surface. That ordering lowers the entropy of the water. When two nonpolar groups come together and bury their surfaces away from water, some of that ordered shell is released back into the disordered bulk, and the entropy of the system rises. The association is favoured not because the oily groups like each other, but because water is happier with less surface to wrap.

This reading of the effect dates to Walter Kauzmann's 1959 analysis of protein denaturation, which argued that the burial of nonpolar side chains away from water is a major force folding a protein into its compact shape.[2] Charles Tanford put the argument on a quantitative footing in 1962, estimating the contribution of hydrophobic interactions to the stability of the folded state from the free energies of transferring nonpolar groups out of water.[3] Later calorimetric work, such as Ross and Subramanian's 1981 survey of the forces behind protein association, confirmed the classical signature of the hydrophobic effect at room temperature: a small or unfavourable enthalpy paired with a favourable entropy change, consistent with the release of ordered water rather than a strong direct bond.[4] The same effect that folds a protein also drives peptides to hide their nonpolar residues — from solvent, from each other, or against a nonpolar surface — and that single tendency is what every hydrophobicity scale is trying to capture.

Framework

Which residues are hydrophobic

Hydrophobicity begins with the side chain. The twenty standard amino acids sort into a rough gradient from oily to water-loving, and the clearest way to see it is the hydropathy scale published by Jack Kyte and Russell Doolittle in 1982, which combined water-to-vapour transfer free energies with the observed interior-versus-surface distribution of residues in folded proteins into a single number for each amino acid.[1] On that scale the most hydrophobic residue, isoleucine, scores +4.5 and the most hydrophilic, arginine, scores −4.5, with everything else in between.[1]

Amino acidCodeKyte–Doolittle valueCharacter
IsoleucineIle / I+4.5Aliphatic, strongly hydrophobic
ValineVal / V+4.2Aliphatic, strongly hydrophobic
LeucineLeu / L+3.8Aliphatic, strongly hydrophobic
PhenylalaninePhe / F+2.8Aromatic, hydrophobic
CysteineCys / C+2.5Thiol, counted hydrophobic here
MethionineMet / M+1.9Thioether, hydrophobic
AlanineAla / A+1.8Small, weakly hydrophobic
GlycineGly / G−0.4Minimal side chain, near neutral
ThreonineThr / T−0.7Polar, hydroxyl
SerineSer / S−0.8Polar, hydroxyl
TryptophanTrp / W−0.9Aromatic but amphipathic
TyrosineTyr / Y−1.3Aromatic, polar hydroxyl
ProlinePro / P−1.6Cyclic, special case
HistidineHis / H−3.2Weakly basic, polar
GlutamateGlu / E−3.5Acidic, charged
GlutamineGln / Q−3.5Polar amide
AspartateAsp / D−3.5Acidic, charged
AsparagineAsn / N−3.5Polar amide
LysineLys / K−3.9Basic, charged
ArginineArg / R−4.5Basic, strongly hydrophilic

Three cautions come with a table like this. First, the placement of a few residues is scale-dependent: the aromatic residues tryptophan and tyrosine are large and nonpolar in part, yet their polar groups and their preference for membrane interfaces push them toward the middle or even the hydrophilic side on some scales, and cysteine's position depends on whether it is treated as a free thiol or a disulfide.[1][7] Second, the numbers describe the isolated side chain, not the residue's behaviour inside a particular sequence, where neighbours and folding change the picture. Third, hydrophobicity is a continuum, not two bins; the table is a ranking, and the cut between "hydrophobic" and "hydrophilic" is a convenience, not a law.

Scales

Hydrophobicity scales: how a number gets assigned

A hydrophobicity scale is any consistent set of numbers that ranks the amino acids by their aversion to water, and there are dozens of them because there are several defensible ways to measure that aversion. They fall into a few families. One family is built from solubility and partitioning experiments: Yasuhiko Nozaki and Charles Tanford's 1971 study measured how far amino acids and small peptides dissolve in water versus aqueous ethanol and dioxane, and converted the difference into a transfer free energy — one of the first experimental hydrophobicity scales.[5] A second family is statistical, reading hydrophobicity from where residues sit in known protein structures, buried in the core or exposed on the surface, as in part of the Kyte–Doolittle construction.[1] A third family is empirical and chromatographic, deriving a value for each residue from how model peptides behave on a reversed-phase column, discussed below. A fourth is biological, tuned to a particular question, such as Thomas Hopp and Kenneth Woods's 1981 scale built to find hydrophilic, antigenic stretches of proteins.[6]

The scales that matter most for membranes were measured directly against lipid. William Wimley and Stephen White determined an "interface" scale in 1996 from the free energy of partitioning peptides into the headgroup region of a lipid bilayer, and a companion octanol scale from host–guest pentapeptides, giving whole-residue values that include the peptide backbone rather than the side chain alone.[7][8] Other widely used sets include the consensus scale assembled by David Eisenberg and colleagues, which averaged several earlier scales into a normalized common scale, and the parameters developed by Stephen Black and David Mould to handle modified residues.[9][13] The table gives a sense of how the families differ.

ScaleHow it was derivedWhat it emphasises
Kyte–Doolittle (1982)Combined water-to-vapour transfer energies with interior-versus-surface distribution in folded proteinsA general-purpose “hydropathy” ranking; the default for hydropathy plots and GRAVY[1]
Nozaki–Tanford (1971)Solubility of amino acids in water versus ethanol and dioxane, as transfer free energyDirect experimental transfer energies for side chains[5]
Hopp–Woods (1981)Hydrophilicity values tuned against known antigenic sitesFinding exposed, hydrophilic segments; an inverted emphasis[6]
Eisenberg consensus (1984)Normalized average of several earlier scalesA smoothed common scale, used with the hydrophobic moment[9]
Wimley–White interface and octanol (1996)Partitioning of peptides into a lipid-bilayer interface and into octanol; whole-residueMembrane and interface behaviour, backbone included[7][8]
Reversed-phase HPLC coefficients (Guo/Hodges 1986; Mant 2009)Retention of model peptides on a nonpolar columnPractical, chromatography-based side-chain coefficients[14][15]

Because the methods disagree about edge cases, the scales correlate strongly but not perfectly. A 2003 evaluation by Biswas, DeVido and Dorsey compared the main experimental approaches for measuring amino-acid hydrophobicity and the interactions behind them, underscoring that the choice of method, solvent and model system shapes the numbers.[17] In practice an analyst picks the scale that matches the question: a hydropathy plot of a membrane protein uses Kyte–Doolittle or Wimley–White, a retention prediction uses a chromatographic set, and an amphipathicity calculation uses a normalized consensus scale.

Metrics

From residues to a whole peptide: GRAVY and the hydrophobic moment

Turning per-residue numbers into a property of a whole peptide takes a summarising step, and two summaries dominate. The simpler is GRAVY, the grand average of hydropathy. As implemented in the ExPASy ProtParam tool, GRAVY is the sum of the Kyte–Doolittle hydropathy values of all the residues divided by the number of residues in the sequence.[1][19] A positive GRAVY marks an overall hydrophobic sequence and a negative GRAVY an overall hydrophilic one. GRAVY is a composition average: it ignores the order of the residues entirely, so two peptides with the same amino-acid content have the same GRAVY even if the residues are arranged very differently.

That blind spot is exactly what the hydrophobic moment was invented to see. David Eisenberg and colleagues introduced it in 1982–1984 as a way to detect periodicity in hydrophobicity along a sequence.[9] The idea is to treat each residue's hydrophobicity as a vector that points outward from the axis of a regular structure — for an alpha-helix, each successive residue is rotated about 100 degrees from the last — and to add the vectors head to tail. If the hydrophobic residues happen to fall on one side of the helix, their vectors reinforce and the sum, the hydrophobic moment, is large; the peptide is amphipathic, with a hydrophobic face and a hydrophilic face. If hydrophobic and hydrophilic residues are scattered evenly, the vectors cancel and the moment is near zero. Plotting mean hydrophobicity against hydrophobic moment — the hydrophobic moment plot of Eisenberg, Schwarz, Komaromy and Wall — separates globular proteins, surface-seeking proteins and membrane-spanning proteins into distinct regions.[10] Cornette and co-workers later refined which scales best reveal this periodicity, confirming a dominant repeat close to the 100-degree spacing of an alpha-helix.[12] Between them, GRAVY answers “how hydrophobic overall?” and the hydrophobic moment answers “how one-sided?”

Measurement

Measuring hydrophobicity: partitioning and reversed-phase HPLC

Hydrophobicity is measured, not just computed, and the two experimental routes are partitioning and chromatography. Partitioning asks how a residue or peptide divides itself between water and a less polar phase. The classic version is the water–octanol partition coefficient, the same logP that drug chemists use, and the membrane-specific versions measured by Wimley and White, where the “phase” is the interface or interior of a real lipid bilayer and the readout is a free energy of transfer.[7][8] Nozaki and Tanford's solubility measurements belong to this family too.[5] Partitioning gives a thermodynamic number, a transfer free energy, that is close to the physical definition of hydrophobicity.

The second route, and the one most familiar in a working peptide laboratory, is reversed-phase HPLC. A reversed-phase column is packed with a nonpolar stationary phase, so a peptide's retention time is a direct report of how strongly its surface binds a nonpolar environment — a chromatographic hydrophobicity measurement. Starting in the 1980s, Robert Hodges's group and others built retention-prediction models by measuring model peptides of the form Ac-Gly-X-X-(Leu)3-(Lys)2-amide, where the test residue X is varied, and assigning each amino acid a retention coefficient.[14] Mant, Kovacs, Hodges and colleagues later published a refined set of intrinsic side-chain hydrophilicity/hydrophobicity coefficients from model peptides and compared them with other scales.[15] Modern tools such as Oleg Krokhin's Sequence-Specific Retention Calculator extend the idea to hundreds of peptides, adding corrections beyond simple composition.[16] Because retention is so reproducible, RP-HPLC retention is often used directly as the operational definition of a peptide's hydrophobicity, and it is also the thread that connects hydrophobicity to the everyday business of purifying and checking peptides, the subject of What Is HPLC?

Behaviour

Solubility and aggregation

The first place hydrophobicity shows itself is in whether a peptide dissolves and whether it stays dissolved. A sequence rich in hydrophobic residues presents a large nonpolar surface to water, and the same thermodynamics that fold a protein's core push those surfaces to minimise their water contact. The cheapest way for a peptide to do that is to associate with other copies of itself, burying hydrophobic faces together. The result ranges from poor solubility, through haze and precipitation, to the formation of gels and ordered aggregates. Nozaki and Tanford's solubility work is a direct window on the starting point: how far an amino acid or small peptide will dissolve depends on the free energy of moving its side chains out of water.[5]

This is why hydrophobicity is a central variable in peptide handling. Highly hydrophobic sequences are harder to bring into aqueous solution and more prone to come back out of it, and the problem is amplified when a sequence is also amphipathic, with a clean hydrophobic face that can line up against its neighbours. The practical mechanics of this — which sequences turn a reconstituted solution cloudy or jelly-like, and how pH and co-solvents shift the balance — are covered in Which Peptides Gel? and Peptide pH and Mixing. The point here is that those behaviours are downstream of a single property: how much nonpolar surface the sequence is trying to keep away from water.

Analytical

Separation, retention and the limits of prediction

Hydrophobicity is also what makes reversed-phase separation work, and looking closely at that relationship shows both its power and its limits. A 2023 review by Al Musaimi, Mercado-Valenzo and Williams states the principle plainly: peptide hydrophobicity is the physicochemical property that governs the reversed-phase separation process and determines how peptides interact with the chromatographic packing.[18] In the idealised model, retention is treated as governed by hydrophobic interactions alone, with adsorption to the nonpolar surface as the main mechanism and partitioning contributing to a lesser extent; the clear exceptions are the charged residues, where arginine and lysine can also interact ionically with residual silanol groups on the packing.[18]

The attraction of this picture is that it suggests a peptide's retention could be predicted by adding up the hydrophobicity of its residues, and additive retention-coefficient models do exactly that.[14][15] But the same review is careful about where the additive assumption breaks down. The composition-based rule is reliable only for short peptides, broadly up to around fifteen residues; beyond that the correlation decays, and one cited analysis found the agreement collapsing for peptides of nineteen residues until the longest were excluded.[18] Conformation matters too: a folded or structured peptide exposes less nonpolar surface than a random coil, lowering its effective hydrophobicity below what its composition predicts.[18] And order matters as much as content — the review notes that the same amino acid behaves differently depending on its position and its neighbours in the chain, so peptides with identical composition but different sequence need not elute at the same time.[18] The lesson for anyone reading a chromatogram is that retention is an excellent, reproducible hydrophobicity signal, but not a literal stand-in for a composition sum; the extra factors are real. For the instrument and method behind these separations, see What Is HPLC?, and for how retention and purity are reported, see Peptide Purity Grades Explained.

Biology

Membranes, amphipathicity and the hydrophobic moment plot

The third arena is the lipid membrane, where hydrophobicity decides whether and how a peptide associates with a bilayer. Two tools from the earlier sections combine here. A Kyte–Doolittle hydropathy plot slides a window along the sequence and averages the hydropathy within it; a stretch whose average stays high over a long window is a candidate membrane-spanning segment. Kyte and Doolittle suggested a window of nineteen residues with a cutoff near +1.6 for identifying such transmembrane segments, and a shorter window of roughly seven to eleven residues for distinguishing buried from surface regions of soluble proteins.[1] The hydrophobic moment adds the directional dimension: a membrane-surface-seeking or pore-forming peptide is typically amphipathic, with a high hydrophobic moment, so that one face can lie against the lipid while the other faces water.[9][10]

The scales tuned to this arena are the whole-residue membrane scales. Wimley and White measured the free energy of partitioning peptides into the interfacial region of a lipid bilayer, producing an interface scale, and a companion octanol scale, that together describe the two environments a membrane peptide encounters — the watery headgroup zone and the oily core.[7][8] Because these scales are whole-residue, including the peptide bond itself, they capture something the side-chain-only scales miss: the backbone is costly to move out of water, which is why isolated membrane helices tend to be long and uniformly nonpolar. Eisenberg and McLachlan's work on solvation energy in folding and binding set these partitioning ideas in the broader framework of how burying surface area stabilises structure.[11] None of this concerns what a peptide does in an organism; it is the physical chemistry of how a sequence relates to a lipid interface.

Reference

Hydrophobicity versus charge: two different axes

Hydrophobicity is easy to confuse with charge, and keeping them separate is worth a section of its own. Hydrophobicity is about the nonpolar–polar axis: how much of a peptide's surface would rather avoid water. Charge is about electrostatics: how many ionisable groups carry a positive or negative charge at a given pH, summarised by the net charge and by the isoelectric point, the pH at which the positive and negative charges cancel. The two are independent. A peptide can be hydrophobic and strongly charged, or hydrophilic and neutral, or any combination; a lysine adds charge and hydrophilicity at once, while a leucine adds neither charge nor polarity.

They are measured differently, too. Hydrophobicity comes from partitioning or reversed-phase retention; charge comes from titration, electrophoretic mobility or ion-exchange behaviour and from calculation using the pKa values of the ionisable groups. And they govern different, sometimes competing, behaviours: charge dominates ion-exchange separation and much of a peptide's pH-dependent solubility, while hydrophobicity dominates reversed-phase separation and nonpolar aggregation. In reality the two interact — charged residues are also among the most hydrophilic, so a sequence's charge and its hydrophobicity are correlated — but treating them as one property leads to wrong predictions. The clean way to think about a peptide's surface chemistry is as a point on two axes at once, one for charge and one for hydrophobicity.

Honest limits

What this guide does not establish

This guide is an educational account of hydrophobicity as a physicochemical property and the methods used to measure it. A few limits are worth stating plainly.

  • The numbers are scale-dependent. A residue's hydrophobicity value, and a peptide's score, depend on which scale is used; the Kyte–Doolittle values in the table are one widely used set among several, not absolute constants.[1][17]
  • It describes a property of a sequence, not any product. Hydrophobicity follows from the amino-acid sequence; it is not a statement about the purity, behaviour or origin of any specific material.
  • Predictions are approximations. Composition-based estimates such as GRAVY and additive retention models ignore conformation, residue order and chain length, which measurably change real behaviour.[18]
  • Nothing here concerns use in a person or animal. Membrane interaction, solubility and chromatography are discussed only as physical chemistry; this guide does not describe how to use any product and makes no therapeutic claim.
FAQ

Frequently asked questions

What is peptide hydrophobicity?

Peptide hydrophobicity is the tendency of a peptide, and of each amino-acid side chain in it, to avoid water and prefer nonpolar surroundings. It is driven by the hydrophobic effect, quantified by hydrophobicity scales that assign a number to every residue, and measured in practice by how strongly a peptide is retained on a reversed-phase HPLC column.

What is a hydrophobicity scale?

A hydrophobicity scale is a table that assigns each of the twenty amino acids a number reflecting how strongly its side chain avoids water. Different scales are built in different ways: from the free energy of transferring a residue from water to an organic solvent, from how a residue partitions into a lipid membrane, from statistical analysis of which residues sit buried inside folded proteins, or from how a model peptide behaves on a reversed-phase column. Because the methods differ, the scales do not agree exactly, though they agree on the broad ranking.

Which amino acids are the most hydrophobic?

On the Kyte and Doolittle hydropathy scale the most hydrophobic residues are isoleucine, valine, leucine, phenylalanine, cysteine, methionine and alanine, all with positive values, while the charged and polar residues arginine, lysine, aspartate, glutamate, asparagine, glutamine and histidine are the most hydrophilic, with the most negative values. The exact order shifts between scales, but the aliphatic and aromatic side chains are consistently the most hydrophobic and the charged side chains the least.

What is GRAVY (grand average of hydropathy)?

GRAVY, the grand average of hydropathy, is a single number for a whole peptide or protein. As computed by the ExPASy ProtParam tool it is the sum of the Kyte and Doolittle hydropathy values of all the residues divided by the number of residues in the sequence. A positive GRAVY indicates an overall hydrophobic sequence and a negative GRAVY an overall hydrophilic one.

What is the hydrophobic moment?

The hydrophobic moment is a measure of how lopsided a peptide's hydrophobicity is around a repeating structure such as an alpha-helix. Introduced by Eisenberg and colleagues, it is calculated by treating each residue's hydrophobicity as a vector pointing out from the helix axis and summing the vectors. A large hydrophobic moment means the hydrophobic residues cluster on one face, making the peptide amphipathic; a small moment means they are spread evenly.

How is peptide hydrophobicity measured?

By two broad approaches. Experimentally, hydrophobicity is measured from partitioning — how a residue or peptide distributes between water and an organic solvent such as octanol, or between water and a lipid membrane — and from reversed-phase HPLC, where a peptide's retention time reflects how strongly it binds a nonpolar column. Computationally, it is estimated from sequence by summing residue values from a hydrophobicity scale, as in a GRAVY score or a hydropathy plot.

Why does hydrophobicity affect reversed-phase HPLC retention?

Reversed-phase HPLC separates peptides on a nonpolar stationary phase, so the more hydrophobic a peptide is, the more strongly it adsorbs to the column and the later it elutes. Retention is therefore widely used as a practical hydrophobicity readout, and retention-prediction models sum per-residue hydrophobicity coefficients. The link is not perfect: retention also depends on peptide length, conformation, the position of each residue and the behaviour of charged residues, so composition alone does not predict it exactly.

Is hydrophobicity the same as a peptide's charge or isoelectric point?

No. Hydrophobicity describes how a peptide relates to water versus nonpolar environments, while charge and the isoelectric point describe its electrostatics — how many positive and negative groups it carries at a given pH. They are separate axes: a peptide can be hydrophobic and highly charged, or neutral and hydrophilic. The two properties are measured differently and govern different behaviour, though both influence solubility and chromatographic separation.

Sources

References

  1. Kyte, J., & Doolittle, R. F. (1982). A simple method for displaying the hydropathic character of a protein. Journal of Molecular Biology, 157(1), 105–132. doi:10.1016/0022-2836(82)90515-0
  2. Kauzmann, W. (1959). Some factors in the interpretation of protein denaturation. Advances in Protein Chemistry, 14, 1–63. doi:10.1016/S0065-3233(08)60608-7
  3. Tanford, C. (1962). Contribution of hydrophobic interactions to the stability of the globular conformation of proteins. Journal of the American Chemical Society, 84(22), 4240–4247. doi:10.1021/ja00881a009
  4. Ross, P. D., & Subramanian, S. (1981). Thermodynamics of protein association reactions: forces contributing to stability. Biochemistry, 20(11), 3096–3102. doi:10.1021/bi00514a017
  5. Nozaki, Y., & Tanford, C. (1971). The solubility of amino acids and two glycine peptides in aqueous ethanol and dioxane solutions. Journal of Biological Chemistry, 246(7), 2211–2217. doi:10.1016/S0021-9258(19)77210-X
  6. Hopp, T. P., & Woods, K. R. (1981). Prediction of protein antigenic determinants from amino acid sequences. Proceedings of the National Academy of Sciences, 78(6), 3824–3828. doi:10.1073/pnas.78.6.3824
  7. Wimley, W. C., & White, S. H. (1996). Experimentally determined hydrophobicity scale for proteins at membrane interfaces. Nature Structural Biology, 3(10), 842–848. doi:10.1038/nsb1096-842
  8. Wimley, W. C., Creamer, T. P., & White, S. H. (1996). Solvation energies of amino acid side chains and backbone in a family of host–guest pentapeptides. Biochemistry, 35(16), 5109–5124. doi:10.1021/bi9600153
  9. Eisenberg, D., Weiss, R. M., & Terwilliger, T. C. (1984). The hydrophobic moment detects periodicity in protein hydrophobicity. Proceedings of the National Academy of Sciences, 81(1), 140–144. doi:10.1073/pnas.81.1.140
  10. Eisenberg, D., Schwarz, E., Komaromy, M., & Wall, R. (1984). Analysis of membrane and surface protein sequences with the hydrophobic moment plot. Journal of Molecular Biology, 179(1), 125–142. doi:10.1016/0022-2836(84)90309-7
  11. Eisenberg, D., & McLachlan, A. D. (1986). Solvation energy in protein folding and binding. Nature, 319(6050), 199–203. doi:10.1038/319199a0
  12. Cornette, J. L., et al. (1987). Hydrophobicity scales and computational techniques for detecting amphipathic structures in proteins. Journal of Molecular Biology, 195(3), 659–685. doi:10.1016/0022-2836(87)90189-6
  13. Black, S. D., & Mould, D. R. (1991). Development of hydrophobicity parameters to analyze proteins which bear post- or cotranslational modifications. Analytical Biochemistry, 193(1), 72–82. doi:10.1016/0003-2697(91)90045-U
  14. Guo, D., Mant, C. T., Taneja, A. K., Parker, J. M. R., & Hodges, R. S. (1986). Prediction of peptide retention times in reversed-phase high-performance liquid chromatography I. Journal of Chromatography A, 359, 499–518. doi:10.1016/0021-9673(86)80102-9
  15. Mant, C. T., et al. (2009). Intrinsic amino acid side-chain hydrophilicity/hydrophobicity coefficients determined by reversed-phase high-performance liquid chromatography of model peptides. Biopolymers (Peptide Science), 92(6), 573–595. doi:10.1002/bip.21316
  16. Krokhin, O. V. (2006). Sequence-specific retention calculator. Algorithm for peptide retention prediction in ion-pair RP-HPLC. Analytical Chemistry, 78(22), 7785–7795. doi:10.1021/ac060777w
  17. Biswas, K. M., DeVido, D. R., & Dorsey, J. G. (2003). Evaluation of methods for measuring amino acid hydrophobicities and interactions. Journal of Chromatography A, 1000(1–2), 637–655. doi:10.1016/S0021-9673(03)00182-1
  18. Al Musaimi, O., Mercado-Valenzo, O. M., & Williams, D. R. (2023). Factors influencing the prediction accuracy of model peptides in reversed-phase liquid chromatography. Separations, 10(2), 81. doi:10.3390/separations10020081
  19. Gasteiger, E., et al. (2005). Protein identification and analysis tools on the ExPASy server. In The Proteomics Protocols Handbook (pp. 571–607). Humana Press. doi:10.1385/1-59259-890-0:571

To go deeper on the properties around hydrophobicity, see What Is the Isoelectric Point? for the charge axis and What Is an Amino Acid? for the side chains that set it; for the behaviours it drives, see Which Peptides Gel? and Peptide pH and Mixing; and for the separation it governs, see What Is HPLC?

All Patriot Labs products are sold strictly for in-vitro research and laboratory use only. Not for human or veterinary consumption. This guide is educational and describes the physical chemistry of peptide hydrophobicity in general terms; it is not medical advice, does not describe how to use any product, and makes no claim about the properties or manufacturing location of any specific product.